Description
All the sheets of RC-Carbonstore will be produced by our definitions in highest Quality Standards
The sheets are made in a special process (RTM - Resin Transfer Moulding), wich leads to less air intakes, resulting in higher strength and bending stiffness than compared to the common used process where sheets are made out of pressed Prepregs
The standard thickness-tolerance of carbon sheets normally is set with +/-10%
OURS JUST HAVE +/-5%, which needs extremely precise machines! (> 2mm thickness)
The sheet`s core is made out of 0/90° orientated UD-Layers (Unidirectional), which leads to a much higher stability than full-woven Sheets
(parallel lines on the cutting edge, standard in RC-Racing)
The surface layer has a thickness of ~0,2mm (200g/qm 3K plain fabric + silver aluminium- and colored polyethylen-string, 2x2mm fields), the UD-Layers ~0,15mm
The sheets have very good milling characteristics, without any bending after cutting
Just because of the aluminium and PE inside you have a Little afterwork, just going over the cutting edge with a sharp knife
CNC-Tools for Carbon you`ll find in our Webshop too:
-Drill: ZCCCF
-Cutout: CFR
-Chamfer: CS90-65 (also possible with 598934)
-Countersunk: 598934
If you still have any questions, don`t hasitate to send us an email
| Shipping weight: | 0,24 Kg |
| Product weight: | 0,24 Kg |
