Type-12 Crossflex Chassis Brass inserts
Description
Type-12 Crossflex Brass Inserts (8pcs)
Fits:
-XRAY X12´21
Weight of Chassis:
Crossflex: ...g
Crossflex + Brass inserts: ...g
(Brass inserts ...g)
The function-patent for our all new Crossflex Chassis is already pending.
The idea was to become able to adjust the weight-balance as well as the flex individually with every insert by using different fixing-positions without the need of changing the whole chassis (which is always hard front/rear or soft front/rear, but not hard front / soft rear)
if fix the brass inserts on an axle 90° to driving direction it almost doesn´t have any influence to the flex, if also fix the other positions over cross the inserts decrease the flex (=> Crossflex)
Includes:
All the needed screws (45pcs) and shims (20pcs) are included, recommended Screwdriver you find in our Shop, 1,5mm tip
Fits:
-XRAY X12´21
Weight of Chassis:
Crossflex: ...g
Crossflex + Brass inserts: ...g
(Brass inserts ...g)
The function-patent for our all new Crossflex Chassis is already pending.
The idea was to become able to adjust the weight-balance as well as the flex individually with every insert by using different fixing-positions without the need of changing the whole chassis (which is always hard front/rear or soft front/rear, but not hard front / soft rear)
if fix the brass inserts on an axle 90° to driving direction it almost doesn´t have any influence to the flex, if also fix the other positions over cross the inserts decrease the flex (=> Crossflex)
Includes:
All the needed screws (45pcs) and shims (20pcs) are included, recommended Screwdriver you find in our Shop, 1,5mm tip
